jiejie microelectronics co. , ltd tel +86 - 513 - 83639777 c p 1101 s b series description: c p 1101sb series thyristors component . they are designed equipment from damaging overvoltage transients. such as modems, telephones, line cards, answering machines, fax machines, t1/e1, xdsl and more. features : ? excellent capability of absorbing transient surge ? quick response to surge voltage (ns level) ? eliminates overvoltage caused by fast rising transients ? moisture sensitivity level: level 1 ? non degenerative absolute maximum ratings parameter storage temperature range operating junction temperature range repetitive peak pulse current electrical characteristics symbol parameter v d rm peak off - state voltage i drm off - state current v s switching voltage i s switching current v t on - state voltage i t on - state current i h holding current c o off - state capacitance jiejie microelectronics co. , ltd - 1 / 5 - thyristors is a type of semi - conduct they are designed to protect baseband equipment from damaging overvoltage transients. modems, telephones, line cards, answering machines, fax machines, t1/e1, xdsl and more. of absorbing transient surge quick response to surge voltage (ns level) eliminates overvoltage caused by fast rising transients moisture sensitivity level: level 1 ratings (t a =25oc , rh=45% - 75% , unless otherwise parameter symbol value storage temperature range t stg - 60 to +150 junction temperature range t j - 40 to +150 repetitive peak pulse current i pp 80 electrical characteristics (t a =25 ) parameter state voltage state current switching voltage switching current state voltage state current state capacitance v - i curve -i +i -v i t i drm v t i s i h jiejie microelectronics co. , ltd http://www.jjwdz.com rev. 1 .0 unless otherwise noted ) value unit 60 to +150 40 to +150 80 a sm b symbol +v v drm v s 2
c p 1101 s b series j ie j ie m icroelectronics co. , ltd tel +86 - 513 - 83639777 - 2 / 5 - http://www.jjwdz.com electrical characteristics (t a =25 , continued) part number i drm @ v drm v s @i s v t @ i t i h c o marking a v v ma v a ma pf max max max max max min max c p110 1 s b 5 9 5 130 800 4 2.2 1 0 0 70 a 11 b cp1301sb 5 115 140 800 4 2.2 100 70 a13b v s i s m e a s u r e d a t 1 0 0 k v / s off - state capacitance is measured in v dc =2v, v rms =1v, f=1mhz surge ratings series i pp ( a ) min 2 10us 8 20us 10 360us 10 1000us b 2 50 2 50 125 80 ordering information marking a11b : device marking code 1409: in ninth week, 2014 1409 a11b
c p 1101 s b series j ie j ie m icroelectronics co. , ltd tel +86 - 513 - 83639777 - 3 / 5 - http://www.jjwdz.com soldering parameters reflow condition pb - free assembly (see fig. 2 ) pre heat - temperature min (t s(min) ) +150 - temperature max(t s(max) ) +200 - time (min to max) (ts) 60 - 180 secs. average ramp up rate (liquid us temp (t l ) to peak) 3 /sec. max t s(max) to t l - ramp - up rate 3 /sec. max reflow - temperature(t l ) (liquid us) +217 - temperature(t l ) 60 - 150 secs. peak temp (t p ) +260(+0/ - 5) time within 5 of actual peak temp (t p ) 30 secs. max ramp - down rate 6 /sec. max time 25 to peak temp (t p ) 8 min. max do not exceed +260 fig.1: tr td pulse waveform %i pp 0 100 50 t r t d t( s) 0 peak value tr = rise time to peak value td = decay time to half value half value fig.2: reflow condition temperature 25 t s(min) t s(max) t l t p tp t l time to peak temperatue time ( t 2 5 t o p e a k ) ramp-up ramp-down preheat critical zone t l to t p t s fig.3: normalized vs change vs. junction temperature fig.4: normalized dc holding current vs. case temperature i h (t j )/i h (t j = 2 5 ) 0.4 -40 -20 0 20 40 60 80 100 120 140 160 t j ( ) -8 percent of vs change(%) 2.0 1.2 4 0 8 12 t c ( ) -4 -40 -20 0 20 40 60 80 100 120 140 160 0.8 1.6 0.6 1.0 1.4 1.8 2 5 2 5
c p 1101 s b series j ie j ie m icroelectronics co. , ltd tel +86 - 513 - 83639777 - 4 / 5 - http://www.jjwdz.com package mechanical data dimensions millimeters inches ref. min. a b c d e f g 4.25 3.30 1.85 0.76 5.08 0.15 0.051 a b do-214aa (smb) c d e f g h h 2.11 max. 4.75 3.94 2.21 1.52 5.59 0.203 0.31 2.44 min. 0.167 0.130 0.073 0.030 0.200 0.002 0.006 0.083 max. 0.187 0.155 0.087 0.060 0.220 0.008 0.012 0.096 k j l j k 6.80 l 2.40 2.60 0.270 0.090 0.100 tape and reel specification - smb e f d p0 p1 p a b w outline reel (pcs) per carton (pcs) reel diameters (mm) taping 3 ,000 48 ,000 330 dimensions millimeters inches ref. a b d d d2 e f 5.69 0.2 1.5 0.25 330.0 13 1 1.75 0.2 5.5 0.1 8.0 0.2 p p0 4.0 0.2 p1 12.0 0.3 2.0 0.2 3.76 0.2 w 16.8 2.0 w1 0.244 0.012 0.059 0.004 13.0 0.512 0.039 0.059 0.008 0.222 0.008 0.315 0.008 0.157 0.008 0.472 0.008 0.079 0.008 0.144 0.012 0.661 0.079
c p 1101 s b series j ie j ie m icroelectronics co. , ltd tel +86 - 513 - 83639777 - 5 / 5 - http://www.jjwdz.com information furnished in this document is believed to be accurate and reliable . however, jiangsu jiejie microelectronics co.,ltd assumes no responsibility for the consequences of use without consideration for such information nor use beyond it. information mentioned in this document is subject to change without notice, apart from that when an agreement is signed, jiangsu jiejie complies with the agreement. products and information provided in this document have no infringement of patents. jiangsu jiejie as sumes no responsibility for any infringement of other rights of third parties which may result from the use of such products and information. this document is the first version which is made in 22 - may . - 201 5 . this document supersedes and replaces all infor mation previously supplied. is a registered trademark of jiangsu jiejie microelectronics co.,ltd. copyright ? 201 5 jiangsu jiejie microelectronics co.,ltd. printed all rights reserved.
|
